Lead vest

Instructions for proper use and maintenance of X-ray protective clothing:
1. The special clothes hanger must be used to hang the protective clothes. Do not pile up at will. Do not fold or squeeze protective clothing.
2. When the protective clothing is suspended, the shoulders must be aligned with the shoulder of the hanger, and the load bearing balance of the shoulders of the protective clothing must be ensured.
3. When hanging, the fastener of the protective clothing must be closed completely. Do not hang the protective clothing randomly. Do not hang the front of the protective clothing on the wall
in the air.
4. Adhesion of protective clothing should start from the shoulder and follow the principle of adhesion from bottom to top.
5. Do not buckle the belt with excessive force. Do not buckle the belt too tightly. After buckling, the pleats on the protective clothing must be checked
Wrinkles, and try to smooth them.
6. When wearing protective clothing, do not sit on the protective clothing. It is strictly forbidden to squat, lie or press on the protective clothing.
7. Protective clothing must be kept away from heat sources. Do not lean on the heating when wearing protective clothing. Do not store or hang protective clothing
It's by the heat.
8. Do not contact the protective clothing with sharp objects.
Remember: any form of extrusion, folding and pulling and other incorrect use methods will damage the inner material of the protective clothing, resulting in the fracture and fall off of the inner layer, thus affecting the protective function of the protective clothing.